StreetSmart™ Drinking Fountains :

• Model 3500 is a StreetSmart™ "Hi-Lo", vandal-resistant, barrier-free, pedestal drinking fountain with a green powder-coated finish. Pedestal, access door and arm are constructed of corrosion-resistant Type 304 all welded heavy-duty stainless steel. Bowls are integral 3/8" cast stainless steel, which prevents removal.

Electric Water Coolers :

• Model HWBFA8.VRC vandal-resistant, barrier-free, wall mounted, self-contained, 7.7 gph, electric water cooler is perfect for commercial and institutional applications. This model features a 14 gauge satin finish stainless steel cabinet with integral basin.

Wall Mounted :

• Model HWO8 shall deliver a minimum of 8 gph of water at 50°F water at 80°F inlet water at 90°F ambient (room temperature).
  
  
  

Floor Mounted:

• Waterways are lead-free in materials and construction
• Dial-A-Drink Bubbler® with flexible guard
• Stainless steel top
• Heavy-gauge steel cabinet with separate galvanized steel base
• High-efficiency cooling tank and coil
• Refrigerant R-134a

Remote Chillerse :

• Model HCR8 remote chiller provides 8.0 gallons (30.28 liters) per hour of cold water. This remote can provide chilled water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools, and offices.
  

Mounting Systems:

• Model MTGFR.SM mounting frame is manufactured of heavy gauge galvanized steel with pre-punched mounting holes. This mounting system is used with single height electric drinking fountain models and can be shipped prior to complete drinking fountain in order to be installed during rough-in.

Parts & Accessories :

• Model PBA7 push button assembly is used with push button valve 5874, is made of polished chrome-plated brass, and includes the push button with front adjusting screw, operator, round locknut, snap ring and wave washer.
• Every Haws product is built to last and is supported by a compehensive list of replacement parts.

• Model 7460 unmounted eyewash features a round 11" stainless steel receptor and twin Soft-Flo ABS plastic anti-surge eyewash heads. Supply: 1/2". Waste: 1-1/4" IPS.
  
  Model 7460 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Portables:

• Model 7500 portable gravity operated eyewash features a 16-gallon capacity, FDA high-density green polyethylene tank that provides full pattern flushing at .4 gpm for over 15 minutes. Pulling the yellow activation arm down to the open position activates unit. Tank has handles on top and side to allow for easy handling.
  

Dreanch Showers:

• Model 8123 drench shower features a 10-1/2" stainless steel showerhead and a stay-open ball valve that is activated by a pull rod. Can be installed either horizontally or vertically. Supply: 1" IPS.

Combination Units:

• Model 8325-combination shower and eye/face wash features a 10-5/8" ABS plastic showerhead and an 11" ABS plastic eye/face wash receptor with twin Feather-Flo® ABS plastic eye/face wash heads. A pull rod activates shower. Push flag activates eyewash. Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" IPS.

Laboratory Units:

• Model 7610 sink or countertop mounted polished chrome-plated brass single action swing-down to activate eye/face wash that features twin ABS Feather-Flo® heads. Supply: 1/2" O.D. slip joint.
  
  Model 7610 is certified by CSA to meet the ANSI Z358. 1Standard for Emergency Eyewash and Shower Equipment.

Barrier Free Models:

• To provide emergency response for the disabled, Haws offers a complete line of accessible emergency equipment.

Parts & Accessories:

• Model 8901RFK body spray features a Feather-Flo® ABS plastic eye/face wash head, stay-open squeeze lever valve, eight-foot hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2" IPS.
• Every Haws product is built to last and is supported by a compehensive list of replacement parts.
  

Engineer Systems Shower Booths and Tempering Systems:

• Supplying emergency showers with tempered water protects both the employee and employer. Drench showers with very cold water pose a health hazard to employees and a liability problem to employers. Cold water lines in cold climates can run from 35°F - 45°F (2°C - 7°C). In order to completely flush away hazardous chemicals, it is recommended that contaminated body parts be flushed for a minimum of 15 minutes, and that contaminated clothing be removed.